Although it is an instrument microphone, it is suitable for use in any environment where sensitive miking is required. The gold plated real capacitor transducer used in the NT55s is the same as the one used in the NT5s. The NT55 is a state-of-the-art microphone with a wide dynamic range and spectrum.
The NT55 has a three-position PAD capable of damping 0 dB, -10 dB and -20 dB, and a three-position high-pass filter that can be adjusted to flat, 75 Hz and 150 Hz.
Coming with 2 separate heads with omni and cardioid patterns that you can change according to your needs, the NT55 is ideal for film, broadcast, live performance, surround and open space applications.
1/2 ” gold plated real capacitor capsule
Nickel plated body
0 dB, -10 dB and – 20dB Pad
Flat, 75 Hz and 150 Hz high -pass filter
Large dynamic range
Full frequency response
Switchable cardioid and omni capsules
Custom metal box
Output impedance: 100 Ohm
Signal/noise: 79 dB (1 kHz rel 1 Pa;per IEC651, IEC268-15)
Equivalent noise: 15 dB SPL (IEC651 , IEC268 -15)
136 dB (@1% THD > ; 1 Ohm), 146 dB (@1% THD > 1 Ohm) – pad -10
156 dB (@1% THD > ; 1 Ohm) – pad -20
Sensitivity: -38 dB re 1 Volt /Pascal (16 mV @ 94 dB SPL) +/- 2 dB
Maximum output: 8 dBu (@ 1 % THD > 1 Ohm)
Dynamic area: 121 dB (IEC651, IEC268-15)
Power: 48 Volts (P48), 24 Volt (P24) phantom
Output connector: 3 pin XLR, balanced
Weight: 110 gr.