Please ask for color options before ordering.
The driven aluminum die plate is driven by a high inertia, alloy aluminum plate, high torque DC motor via a durable rubber flat belt, allowing for 33-1/3 degree constant playback, speeds of 45 and 78rpm.
New low resistance spindle
The fully precision machined stainless steel shaft and durable brass bearing maintain the correct rotational speed thanks to reduced friction.
New matt and natural walnut wood
finishes The TN-400BT is available in a natural walnut veneer finish as well as in four polished finishes.
Built-in Phono EQ amplifier
The TN-400BT has a built-in Phono EQ amplifier that allows it to be connected to Phono amplifier/micro systems that support MM-type cartridges. The Phono EQ amplifier is a high resolution NJM8080 op-amp chip (designed by JRC) that amplifies the tiny audio signal from titanium with minimal distortion. using.Improved
new subsonic filter for audio
The TN-400BT filters out frequencies below 18Hz, preventing excessive LF signal levels from being sent to the amplifiers and offering an easier electrical load to the connected speakers. This filter is effective when playing distorted vinyl records that would otherwise reduce unwanted woofer movement (subsonic filter is off when Phono EQ THRU) .
USB digital audio output
The TN-400BT also includes an A/D Converter that outputs a 16-bit/48kHz resolution digital audio signal via a USB port on the back. This allows recordings to be digitally archived on a PC. Once converted,
Users can then easily transfer the recordings to devices such as smartphones and car CD players S-shaped statically balanced tone arm
The S-shaped, statically balanced aluminum tone arm is equipped with a counterweight and anti-slip mechanism; Adjustment of full pressure as well as balance and accurate tracking during playback. The tone arm lifter is also fitted for smooth lowering of the tone arm into the recordings.
The tone arm takes universal type headphones, so users can replace cartridges with relative ease. Gold-plated contacts are used to help deliver an undistorted audio signal to reduce signal losses between the volume arm and the headphones.
Bluetooth® wireless audio streaming with AptX® codec
The TN-400BT’s Bluetooth® wireless transmission system supports the traditional SBC codec as well as higher quality aptX® and AAC codecs. This means that even though users don’t have a hi-fi system, it’s really high quality through Bluetooth® enabled headphones or speakers. means they can continue to enjoy vinyl replay.
Connecting the TN-400BT to Bluetooth® headphones or speakers is accomplished with the simple touch of a button. A single-function pairing key and an associated LED indicator provide simple and clear confirmation of connection status.
The TN-400BT brings elegance to the playback process. Machined aluminum work knobs oozing quality, while the aluminum foot provides high resistance to feedback, coupled to a high-density MDF chassis via shock absorbing rubber.
MM type Cartridge from sound technician
The deck comes with an excellent all-purpose MM cartridge that uses a lightweight, aluminum cantilever; this provides an accurate, highly musical standard of playback.
·Sturdy high-density MDF underlayment provides both vibration isolation and elegance
·Contemporary matte finishes or natural walnut veneer options available
・Three speed selection with aluminum casting table 33 / 45 / 78
·Newly developed low resistance spindle for constant rotation speed
·Statically balanced S-Arm with universal type caps
·Audio-technica in-box MM type AT95E cartridge
·Built-in Phono EQ Amplifier with subsonic filter (when THRU is off)
·Built-in TI A/D Converter provides 16-bit/48kHz USB digital output for PC recording
·High quality Bluetooth® aptX® wireless audio transmission
·Machined aluminum work knobs and feet
·Gold-plated RCA jacks (for LINE / PHONO output) and tone arm contacts
·GND terminal on the rear panel
·RCA audio cable with GND cable connection
Three different speeds 33 / 45 / 78