Ortofon MC Vivo Red
Enter the exclusive world of Ortofon’s famous moving coil sound
A special 7-nines (99.9999% pure) copper wire manufactured in Japan.
Low internal impedance makes the cartridge less sensitive to load and therefore ensures compatibility with the widest range of preamps and transformers.
A special and newly developed polycarbonate based resin, Lexan DMX, in Piano Black is used for manufacturing of the body. This revolutionary material improves rigidity and damping properties and also has a very durable scratch resistant surface. Rigidity is an important performance character as the plastic-body serves as basis for the generato.
|Output voltage at 1000 Hz, 5cm/sec.||0,5 mV|
|Channel balance at 1 kHz||< 1,5 dB|
|Channel separation at 1 kHz||> 23 dB|
|Channel separation at 15 kHz||> 15 dB|
|Frequency range at – 3dB||20-25.000 Hz|
|Frequency responce||20-20.000 Hz ± 2 dB|
|Tracking ability at 315Hz at recommended tracking force *)||> 65 µm|
|Compliance, dynamic, lateral||13 µm/mN|
|Stylus type||Elliptical diamond on alu cantilever|
|Stylus tip radius||r/R 8/18 µm|
|Tracking force range||1,6-2,0 g (16-20 mN)|
|Tracking force, recommended||1,8 g (18 mN)|
|Internal impedance, DC resistance||6 Ohm|
|Recommended load impedance||> 10 Ohm|
|Cartridge body material||Lexan DMX|
|Cartridge weight||7 g|